Ultra 6AL Plus Ignition Control, Black, With Start Retard, 3 Rev Limiters, Step Retard, USB, Timing Curves, Retard Timing, Programmable Launch Timing Curve, 4-Bar MAP Sensor, Rotary Dials

Ultra 6AL Plus Ignition Control, Black, With Start Retard, 3 Rev Limiters, Step Retard, USB, Timing Curves, Retard Timing, Programmable Launch Timing Curve, 4-Bar MAP Sensor, Rotary Dials

Features:

-High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery - (Highly efficient Ignition, minimum heat and max spark energy with less current draw)
-High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253
-Powerful capacitive discharge of multiple sparks improves performance
-Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM
-Increase spark series duration lasts for 18 of crankshaft rotation
-Easily installs on 4, 6, 8-cylinder engines with distributors
-Operates on most 7 to 28 volt electrical systems
-Connects to points, magnetic pickups, and -Hall/Crank Input distributors
-Bluetooth connectivity to Mobile app interface for settings and monitors
-MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product
-Straight USB port to easily connect to MSDView using a laptop
-Fully protected against an open coil, shorted coil & open load
-Compact design full MSD power
-Quickens throttle response & improves starting
-Tach Output
-Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app
-Mobile app available settings: Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value
-Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine -RPM for activation
-Programmable Start Retard through rotary switches: 0, 10, 20 degrees
-Programmable cylinder selection through rotary switches: 4, 6, and 8 cylinders
-Alerts and monitors available
-High level of security connection from phone to Ignition box (encryption) including sequence in push button implementation
-Maximum programmable retard of 35 degrees
-Programmable timing curves in 2D Plots or 3D tables (RPM vs Timing vs MAP Pressure) - You can plot the 3D graph and edit a table 20x20 either from Mobile app (Phone) or from MSDView (laptop)
-Programmable Launch Timing (Seconds vs degrees after launch wire activation)
-MAP sensor interface up to 400 kPA (58 PSI / 4 Bars)
-Capable to program cylinder selection and start retard without a computer or app for old school racers (like 6425 or 6428 box)